Crisnail 2 in 1 Base Gloss Gel Revolution

Description

Crisnail Base Gloss is a 2 in 1 product. It can be applied as a base before and as a top coat after your 2 coats of color. It provides a shiny finish to your UV gel nail polish.

1. Apply the Acid Free Primer on the entire nail plate (allow to dry)
2. Apply Bond only on the free edge of the nail (allow to dry)
3. Apply the Base Gloss base coat (2 in 1 base and top coat) on the entire nail plate (apply in a very thin layer, avoiding touching the skin)
4. Place under the lamp (2 minutes 36 watt lamp or 1 minute LED lamp)
5. Apply, in a very thin (translucent) layer, the 1st color layer
6. Place under the lamp (1 minute 36 watt lamp or 45 seconds LED lamp)
7. Apply, in a very thin layer, the 2nd layer of color (so that it is opaque)
8. Place under the lamp (1 minute 36 watt lamp or 45 seconds LED lamp)
9. Apply the Base Gloss top coat (2 in 1 base and top coat) over the entire nail (apply in a very thin layer, avoiding touching the skin and sealing the free edge perfectly)
10. Place under the lamp (2 minutes 36 watt lamp or 1 minute LED lamp)
11. Soak a lint-free 2×2 with Finish Solution and pass over the entire nail to remove the sticky effect